Throttle cable

Post Reply
Haggler
moderator
Posts: 17
Joined: Mon Nov 19, 2018 9:57 pm

Throttle cable

Post by Haggler »

Hi all, finally got my inter 2 running, very happy. But the oil pump part of the throttle cable is sticking. Does anyone know where one can be sourced or is it a trip to venhills to get a special made? The other problem I have is that the tacho only works up to 1000 rpm then stays there. I must add at this point I have fitted a japanese rectifier regulator unit and have just run the signal wire off one of the 3 a/c outputs as it seemd to be this way on the original sparkrite unit. Any help here would be extremely useful
Thanks
Pete N
johnbirchjar
moderator
Posts: 1629
Joined: Sat Mar 07, 2009 11:20 pm

Re: Throttle cable

Post by johnbirchjar »

Hi Haggler,I should think Graham will have a throttle cable(may not be new though)I know there was one on the Commander I sold him a couple of years back,and considering he has been breaking Norton rotories since about the mid '80 he should have one or two laying about Very Happy,and people more knowledgeable than I can advise you on your 'tacho problem,SVF,J.B.
Haggler
moderator
Posts: 17
Joined: Mon Nov 19, 2018 9:57 pm

Re: Throttle cable

Post by Haggler »

Thank you for that John, as a realative newbee I don't know who Graham is, could you enlighten me?
Thanks again Very Happy
D Bracey DB6
moderator
Posts: 39
Joined: Sat Jul 16, 2016 1:36 am

Re: Throttle cable

Post by D Bracey DB6 »

Graham, Startright Motorcycles, Leeds 0113 245643

Hope that helps.

David
Haggler
moderator
Posts: 17
Joined: Mon Nov 19, 2018 9:57 pm

Re: Throttle cable

Post by Haggler »

Hi David, many thanks for that. Will give them a shout
Post Reply