Commander Fuel Leak

Post Reply
berry_jr
moderator
Posts: 29
Joined: Mon Mar 02, 2009 12:44 pm
Location: East Sussex

Commander Fuel Leak

Post by berry_jr »

Heading into work the other morning, I noticed the familiar smell of petrol. I took a brief look and had a massive fuel leak from the right of the macine. That eveing I took the side panel off to investigate, needless to say no fuel leak then. However I fitted a new fuel filter a while back. One of the cleanable ones, chrome ends and clear tube with filter inside. I found the tube is plastic, has started to become opaque and had cracked. Also the rubber seals at each end were breaking up. The filter is about a year old. Needless to say that's in the bin now. There are different makes of the same type of filter, but something to watch for.
User avatar
kanonkopdrinker
Site Admin
Posts: 510
Joined: Fri Jun 15, 2007 5:59 pm
Location: Essex, UK

Re: Commander Fuel Leak

Post by kanonkopdrinker »

Hi JohnI am sure this was the subject of some debate a few Epitrochoids ago ....Pleased to read you're sorted now.David
User avatar
Interpol2471
moderator
Posts: 1357
Joined: Mon Oct 20, 2008 1:02 am

Re: Commander Fuel Leak

Post by Interpol2471 »

I had a clear plastic one break up this weekend on a run lucky there was a small autojumble and a replacement sourced there.Funny thing is the petrol had clearly been degrading the filter plastic and it was only about 6 months old, a fuel filter that is not petrol resistant ..brilliant...!!!! evil
Various rubbish in various states of decay.....
berry_jr
moderator
Posts: 29
Joined: Mon Mar 02, 2009 12:44 pm
Location: East Sussex

Re: Commander Fuel Leak

Post by berry_jr »

I have also had a problem with one of the nylon/ plastic filters. The filter itself had closed up causing fuel starvation. Only been on the bike a couple of months. Ethanol!
User avatar
Richard Negus
moderator
Posts: 1060
Joined: Mon Jun 18, 2007 5:11 pm
Location: Wilds of Lincolnshire

Re: Commander Fuel Leak

Post by Richard Negus »

During an F1 rebuild, I decided it was quicker to have an 'expert' based to the East of Nottingham do a carb overhaul and ultrasonic clean; fitted them yesterday morning.The result? A pair of carbs that flood as soon as they're pressured up (wrong float needles) and float chamber rubber seals that grew by 25% as soon as the cover was taken off (not petrol proof) and won't go back into their grooves. I doubt either were genuine Mikuni parts.Worse still, they're now closed until January 4th!
Just a bike-less old fogey now. Boo-hoo!
Post Reply