Rotary Owners' Club

Hello, I am looking for a good condition air box.

Hello Interpol2471, I might be interested in a good air box if you have one also the Classic rear light cluster.

Many thanks Roger

Hi Richard and thanks for your reply.

Yes randc ... is to be deleted, I have told the website but will check again soon.

Regards Roger

Hello, this is a message to Richard Negus; Richard I recently sent you a personal message to which you might have replied BUT B.T. have shut down that email address; randc@btinternet.com because of low usage! Hopefully my email to you left the ROC so if you have replied would you please mind replyin...

Air cooled.

Hi me again, the demonstrator is "fighting back" but progress is being made.

Can anyone help with the thread type and sizes for each brake master cylinder, can't find it in the manual?

My new coils will not fit where Norton planned, any suggestions?

Many thanks Roger

Minimag did email saying coils and leads etc had to be changed. I will need to replace the coils anyway as one is way out on resistance and I would change the HT leads as a matter of course, the IP2 has not been taxed since 2011. I think the previous owner must have kept the engine lubricated as it ...

Thanks John, and I did contact Minimags who responded almost immediately with details. Julian also suggested I contact Richard Negus [who repaired the gearbox on my first IP2 and Molyed my end plates] as Richard also does an ignition also Andover N. So Richard will you please let me have details of ...

Hi and can I bore you yet again for a word of advice. I have finally sorted out the "demonstrator's" wiring sorted out, after a couple of of enforced delays, but with 12V connected both the ignition unit and the regulator blow their fuses -0h and smokes a bit at first. I am now left with t...

Sorry I meant 210cca.

Sorry I meant 210cca.

Thanks for for your replies, so far it seems AGM is in front but Gordon what is 210ccs, is it something to do with energy density?

Thanks Roger

Hi Tony, thanks for your reply. What type of battery is it? Is lead acid or GEL or Lithium?

Roger

I was brought up on lead acid batteries but might consider newer technology but do I go Lithium, AGM or GEL? What is the difference? Is there an advantage over lead/acid? On visiting various battery manufacturers' websites believe it or believe it not they all say their's is best! Unbiased advice is...

Hello David and thanks for your idea. I am concerned about the noise level, I would prefer a deep growl rather than a noisy race noise. How would you describe yours? I have been looking at the stainless silencers in www.carbuilder.com they supply repackable silencers. Pipe size might be a problem. R...

Thanks Avatar, great help. Roger

Hi all, I hope one of you can help with some small items from my IP2. When looking at the right hand side of the bike, in the carburetor tube right of the carburetor, the inlet pipe, are two metal pipes which look like they should have flexi tubes attached - one of which points to the left, but are ...

Can anyone help? I am struggling with the wiring on the IP2 Demonstrator. The bike came with 3 ignition switches but none with cables attached. One which I think is original the other two is anyone's guess but one of them is more like a car switch with the starting position. I will be buying a new c...

Hi has anyone fitted different [lighter] silencer to the IP2?

I would like to do so provided the noise is not too loud.

Thanks Roger

I have just been given 2 spark plugs for the IP2. These are NGK 7471, are they really for the rotary? Nothing like the plugs in my engine nor my previous IP2 [why did I sell her} nor in the manual.

Many thanks Roger

Hi, I am after several parts for my IP2 which I am making into a Classic look a like, I hope.

I particularly need a lifting handle but other parts as well. If you can help please let me know here or on 01202 825903 or r.392@btinternet.com

Many thanks Roger

Sorry John, just today I bought a universal from Amazon, what could possibly go wrong!

Roger

Sorry John, just today I bought a universal from Amazon, what could possibly go wrong!

Roger

Does anyone have a Classic rear light cluster also the grab rail?

Also, I may need other things as time goes by. What else is out there?

Please reply here or r.392@btinternet.com

Many thanks Roger

Thanks for recent help. I have now struck a new problem regarding the wiring diagram. The Norton diagram shows the E.I.U. has a red '12V to ignition unit relay'. This is on the left hand side of this unit but there is no red on my StartRight E.I.U. Other colours are correct. Then more confusion, the...

Thanks Mark, a great help. Yes I will remove the outrigger sub-frame as well.

I write asking Mark Lepkowski questions about his article in Epitrochoid December 2019 regarding his adoption of a Yamaha bikini fairing to his IP2. Mark did the fairing fit onto the outrigger sub frame which is bolted to the IP2 frame and supported parts of the original headlamp and fairing parts?

Hi Mark, thanks again. the IP2 wiring diagram shows a White/red wire from the red connector in the binnacle going to the oil level switch. The oil level switch has a black lead which I guess is an earth but no connection for the White Red cable - that I can see. I will probably ignore this until lat...

Hello Mark, and thanks for your very prompt reply. I forgot to ask another question; my IP2 wiring diagram shows a coloured wire [I think red, memory not what it used to be] but all I can find is a black earth cable. What am I missing?

Regards Roger

I am struggling with the Norton Demonstrator I bought recently. As I said the bike seems to be loosely assembled but some parts are not fitted to the chassis. So will someone please let know where the following parts are fitted to the chassis. Where do the coils reside? Where does the starter soleno...