Rotary Owners' Club

Hi Jannes,

I was not intending to draw and print the black housing. I do not think there would be enough requirement to make it worthwhile.
Sorry.

Tony

I know this is an old post, but I have had drawn up a 3D printed the first off of Classic rear light cluster. I am going to print a set and send to an owner to try. I will send pictures once fitted, assuming they come out ok. Are people still interested? Note: they will not be quite the same colour ...

Hi, Thanks for the responses. I find a comfortable angle of lean is 10 degrees, this required a 75mm pad under the stand. I tried tightening up the pinch bolt to lessen the slop without success, I then realised the bush was preventing it closing so I removed 1/16 inch off the end of the bush, this e...

I am the temporary custodian of a Commander, I am enjoying riding it but the angle of lean when on the sidestand is frightening, by the time the stand starts to meet the ground, I am thinking I am going to drop it, and it is as much as I can do to lift it back up again. The stand may be slightly wor...