interpol gearchange

Post Reply
nednortonrider
moderator
Posts: 45
Joined: Mon Feb 03, 2014 9:11 pm

interpol gearchange

Post by nednortonrider » Thu Aug 04, 2016 4:49 pm

Does anyone know if the splines on the Interpol gearchange lever are the same as any other bike ?? I am fitting rearsets and don't want to chop the std lever.Other bikes parts are disposable , Norton parts aren't !! Cheers .

wust588
moderator
Posts: 82
Joined: Wed Aug 06, 2008 4:56 pm

Re: interpol gearchange

Post by wust588 » Thu Aug 04, 2016 10:59 pm

I'm not sure if any other bikes have the same size spline as the Interpol / Classic, but the Commander / F1 / F1 Sport, have the std 10mm Japanese type spline.The Commander one is interchangeable with the Interpol / Classic type.

rustynuts
moderator
Posts: 108
Joined: Wed Mar 11, 2009 10:40 pm

Re: interpol gearchange

Post by rustynuts » Fri Aug 05, 2016 1:19 am

As the gearbox came from the Triumph Trident/ BSA Rocket 3, perhaps parts from these bikes may fit, although they probably aren't an cheaper than Norton parts.

User avatar
D Bracey DB6
moderator
Posts: 5
Joined: Sat Jul 16, 2016 1:36 am

Re: interpol gearchange

Post by D Bracey DB6 » Sat Aug 06, 2016 5:14 pm

Andover Norton show the part number and part in stock so guess they've got them. https://andover-norton.co.uk/en/shop-dr ... -mechanism

Wayne
moderator
Posts: 548
Joined: Tue Jul 14, 2009 10:25 pm

Re: interpol gearchange

Post by Wayne » Wed Aug 24, 2016 9:34 pm

I would check its the ally one and not the triumph one thats made of steel. I did not think the ally ones were abailable. But could be wrong.Regards wayne.

Post Reply