rechrome

Post Reply
martinre5
moderator
Posts: 9
Joined: Sat Jul 14, 2007 11:32 am
Location: notrh derbyshire

rechrome

Post by martinre5 »

Iam getting somethings ready for rechroming for the re5 what if any prep work do you need to do on the items or do you just tske rusty old iron and come back with shiny new chrome ? and do you need to blanck off any female threads . thanks martin .
FloridaMike
moderator
Posts: 98
Joined: Tue Mar 02, 2010 8:39 pm

Re: rechrome

Post by FloridaMike »

Probably the best thing to do is talk to the plater, see if he understands motorcycle parts.Some of them will protect various internal and external threads and bolt holes, some of them will just heave everything into the tanks and you'll get to play with tap and die sets and reamers so you can re-use your parts. Chrome is HARD.Some of the chemistry is pretty harsh, so if you have any plastic windows (like an oil level sight glass), you must remove it before you give the parts to the plater or it will get dissolved or otherwise ruined. Make sure the ID of the hole it fits into is masked, or it won't fit back into the hole! Likewise for oil seals, etc - anything not steel or aluminum is going to get eaten.First step is polishing - if you have any fragile or irreplaceable parts, they need to know about it so they don't get ruined (polished the crisp edges off the fins of the head, for instance). If they seem nervous or don't seem to give much of a toss, find yourself another plater.When parts go into the tanks, they are suspended by wires, and these wires can leave witness marks and other blemishes on the chrome - invariably right where everyone can see them. I've also seen brake rods suspended by wires wrapped around the threads for the brake adjuster - tap and die set time again.LIST AND PHOTOGRAPH your parts! Remember these guys see thousands of bits and pieces every month and you want to be sure you get back the correct number of parts and they are all your parts. Give them copies of the photographs, it will help them keep track of your parts. This also provides a record and proof when bits go missing. What you DON'T want to hear is "Oh, that was yours? We gave it to the guy with the sailboat who left for Pago Pago last week. Via Somalia."You might want to ask some chopper shops or restoration shops who does their chrome work. These guys tend to be picky, and the shop they use already has experience with motorcycle parts and has already been trained by Mongo the 35 stone biker (with one big eye in the middle of his forehead) not to screw things up ;-)Best Regards,Mike in FloridaPS - same comments apply to powder coaters.
Wayne
moderator
Posts: 569
Joined: Tue Jul 14, 2009 10:25 pm

Re: rechrome

Post by Wayne »

Hi As mention industral chromers lost small parts ect, the found one in wombell near barnsley wo only do car and bike stuff, did not even loose 2ba screws for the commando, not cheep but were very good, dont no if they are still going may be some one knows if they are still in bussinessRegards Wayne
Wayne
moderator
Posts: 569
Joined: Tue Jul 14, 2009 10:25 pm

Re: rechrome

Post by Wayne »

Hi As mention industral chromers lost small parts ect, the found one in wombwell near barnsley wo only do car and bike stuff, did not even loose 2ba screws for the commando, not cheep but were very good, dont no if they are still going may be some one knows if they are still in bussinessRegards Wayne
martinre5
moderator
Posts: 9
Joined: Sat Jul 14, 2007 11:32 am
Location: notrh derbyshire

Re: rechrome

Post by martinre5 »

the guys in barnsley sound good only a sort ride away over the woodhead any idea what they where called . martin Very Happy
Wayne
moderator
Posts: 569
Joined: Tue Jul 14, 2009 10:25 pm

Re: rechrome

Post by Wayne »

Prestige Electro PlatingUnit 9 Station Road Industrial Estate Wombwell Barnsley S73 0AHContact: Mr. Brian Perkins 01266 751 389Category: chrome / chrome plating
martinre5
moderator
Posts: 9
Joined: Sat Jul 14, 2007 11:32 am
Location: notrh derbyshire

Re: rechrome

Post by martinre5 »

thanks wayne Very Happy
User avatar
Interpol2471
moderator
Posts: 1349
Joined: Mon Oct 20, 2008 1:02 am

Re: rechrome

Post by Interpol2471 »

Phone number does not work?
Various rubbish in various states of decay.....
Steve Gee
moderator
Posts: 57
Joined: Thu May 22, 2008 10:11 am
Location: Bawtry, Doncaster

Re: rechrome

Post by Steve Gee »

They've moved, found this on a Harley forum, "Hi, Prestige Plating have done loads of work for me. Superb quality, great service and very friendly people. There new address is Unit 6, Cliff Street Ind. Est. Mexborough, South Yorkshire, S64 9HU. Tel : 01709 577 004." Not far from me, must remember them in case I need any doing.
Post Reply