Norton Silencers

Post Reply
mick695
moderator
Posts: 27
Joined: Sat Oct 17, 2015 9:00 pm
Location: Newcastle upon Tyne

Norton Silencers

Post by mick695 » Thu Jul 14, 2016 6:32 pm

Got the Rotary silencers back on the bike today. They have been off at an outfit called Camcoat, specialists in ceramic coating. Not cheap, but less than half the price of having to replace them and the finish is good up to 1000 degrees C, so should work on the Rotary...The top photo shows the state they were in before coating, the next is the Satin Black ceramic coating and the other two show the complete silencer with the polished heat shield.Next job is the paint......
You do not have the required permissions to view the files attached to this post.

mfremlin
moderator
Posts: 24
Joined: Tue May 28, 2013 4:25 pm
Location: kent

Re: Norton Silencers

Post by mfremlin » Thu Jul 14, 2016 9:33 pm

Looks a really good finish. I have tried all sorts of heat resistant paint but without success so will give them a call this winter. Thanks for the post and pics.Regards, Mark.

johnbirchjar
moderator
Posts: 1251
Joined: Sat Mar 07, 2009 11:20 pm

Re: Norton Silencers

Post by johnbirchjar » Thu Jul 14, 2016 11:44 pm

They look realy great cool,and how much is exspensive?J.B.

User avatar
kanonkopdrinker
Site Admin
Posts: 431
Joined: Fri Jun 15, 2007 5:59 pm
Location: Essex, UK

Re: Norton Silencers

Post by kanonkopdrinker » Fri Jul 15, 2016 6:50 am

Mick,Can you send these to Rob please for inclusion in the newsletter? Looks most interesting ...A lot of members do not access the forum.CheersDavid

mick695
moderator
Posts: 27
Joined: Sat Oct 17, 2015 9:00 pm
Location: Newcastle upon Tyne

Re: Norton Silencers

Post by mick695 » Fri Jul 15, 2016 7:20 pm

Hi JohnThe cost was £170 + VAT for both silencers and £36 to have them picked up and returned by TNT.They had to have the CAM 2 coating because the surface was badly corroded, silencers in better condition might only need CAM 1 coating which brings the price down considerably.Take a look at their website or give the guys a call, good people to deal with.CheersMick

mick695
moderator
Posts: 27
Joined: Sat Oct 17, 2015 9:00 pm
Location: Newcastle upon Tyne

Re: Norton Silencers

Post by mick695 » Fri Jul 15, 2016 7:45 pm

Hi DaveI've sent a PM to Rob.......CheersMick

Post Reply