Bad flat spot, any ideas? Re5.

Post Reply
RE5Anovice
moderator
Posts: 5
Joined: Mon Jan 07, 2019 2:16 pm

Bad flat spot, any ideas? Re5.

Post by RE5Anovice » Fri Jan 11, 2019 5:27 pm

Bike starts well hot or cold and then runs well to 3,500 rpm; then stutters stalls and surges, then above 4,000 rpm it's fine, well up to 6,000 rpm which is all i'll ever use.
I'm thinking carb set up? Is this a normal vice with the bike?

mike_500
moderator
Posts: 23
Joined: Wed Sep 28, 2016 11:37 pm

Re: Bad flat spot, any ideas? Re5.

Post by mike_500 » Fri Jan 11, 2019 9:01 pm

first thing to do is ultrasonic clean the carb then set it up properly normal cleaning won't cure it only ultrasonic works.but get yourself a workshop manual before you attempt to strip the carb regards mike

Post Reply