Search found 1060 matches
- Mon Sep 14, 2009 6:29 pm
- Forum: General discussion (eveything else)
- Topic: Bonneville, anyone ?
- Replies: 6
- Views: 5505
Bonneville, anyone ?
Having been away for a while, I'm surprised not to find any comment on here of the NRV at Bonneville.It may be a new unofficial record for a rotary-powered motorcycle - but only 9 mph faster than MCN claim for a bog-standard CBR600RR ? Most disappointing when compared to the speeds clocked by the R...
- Mon Aug 31, 2009 10:53 am
- Forum: technical interest and new ideas
- Topic: oil
- Replies: 5
- Views: 5312
Re: oil
"is it worth the extra cost"?. I don't do a lot of miles on my Commander (only 3,400 since March) and intend keeping it until unable to ride it any more. It rolled off the side stand recently and I had to have help picking it up again so it may morph into a naked bike in a few years' time...
- Sun Aug 30, 2009 9:52 am
- Forum: technical interest and new ideas
- Topic: oil
- Replies: 5
- Views: 5312
Re: oil
why are we advised to use comp 2 premix as opposed to injector oil when the engines are supplied by a pump? Hi Steve,I was always lead to believe that 'injector' oils had a % of dilutant to allow them to flow more easily under gravity from tank to pump on two-strokes. This dilutant vaporised at a l...
- Sun Aug 30, 2009 9:39 am
- Forum: technical interest and new ideas
- Topic: Well Nuts
- Replies: 3
- Views: 3731
Re: Well Nuts
These are the type used by Ducati and are made of rubber with a threaded insert, what does anyone think or has anyoned used these fittings before and can comment on their strength. I wouldn't use them for anything important ; ok for a small screen or similar,but the rubber creeps if over-tightened ...
- Fri Aug 14, 2009 8:50 am
- Forum: login and say hello!
- Topic: new member first post
- Replies: 1
- Views: 3194
Re: new member first post
Hi scruffy / Frank,Have a look in your PM Inbox ! I replied to your enquiry on Monday 10th but it seems you haven't looked at it.R.
- Mon Aug 10, 2009 10:55 am
- Forum: technical interest and new ideas
- Topic: erratic running
- Replies: 12
- Views: 10465
Re: erratic running
Public apology to PAUL ! Completely unintentional, can't imagine what I was thinking of !R.Interpol2471 wrote:Who is Ralph LOL I'm Paul OK NEGUS and I knew you would be putting me right anyways
- Thu Aug 06, 2009 9:08 am
- Forum: technical interest and new ideas
- Topic: erratic running
- Replies: 12
- Views: 10465
Re: erratic running
I am sure Richard will be along soon to put me to shame as usual red face Hi Ralph,Wouldn't dream of it, m'dear! Classics are Boyer ignition. (where's the smug.smiley icon?)Hi John,Your problem sounds a bit fuel-related ; have a look at the vacuum pipe between engine and fuel tap. The rubber end mo...
- Thu Aug 06, 2009 8:58 am
- Forum: General discussion (eveything else)
- Topic: F1 Sport for sale
- Replies: 11
- Views: 9715
Re: F1 Sport for sale
Hi Derickit should have had more power a lot more power and a 6 speed box, the front wheel never trys to get airborn under power Hi Wayne,Quite agree ! A bit of a sheep in wolf's clothing really, but constrained by legislation and supplier control.I still don't have any idea how to un-strangle the ...
- Wed Aug 05, 2009 9:19 am
- Forum: General discussion (eveything else)
- Topic: F1 Sport for sale
- Replies: 11
- Views: 9715
Re: F1 Sport for sale
Hi Wayne,The bike is genuine and the quoted history is correct; the recorded mileage is probably correct too. NML rebuilt it on behalf of its second owner, who did a few hundred miles and then decided it wasn't what he really wanted and bought an IP2 to modify instead.NML advertised it on the web s...
- Tue Aug 04, 2009 6:51 pm
- Forum: login and say hello!
- Topic: Hello!
- Replies: 17
- Views: 15385
Re: Hello!
as it is a synthetic oil, does the oil system have to be flushed or is silkolene fully miscible with Rotella? Hi Johnny,Welcome to the forum and to your brother rotaristas (are there any rotaristettes ??).Synthetic and mineral oils shouldn't be mixed so the usual thing is to empty the tank as much ...
- Mon Aug 03, 2009 9:11 am
- Forum: technical interest and new ideas
- Topic: Timing and Balancing
- Replies: 16
- Views: 11638
Re: Timing and Balancing
Hi Malc,Did you notice any reduction in seal sticking or end plate scoring when Comp 2 was introduced ? The simple smoke test for oils at Shenstone showed that it vaporised at a higher temperature than Rotella and left less of a residue.Mid-West did the same sort of tests and intially only approved...
- Sat Aug 01, 2009 8:43 pm
- Forum: technical interest and new ideas
- Topic: Timing and Balancing
- Replies: 16
- Views: 11638
Re: Timing and Balancing
Ypu shouldn't tell me things like that red face It was actually one of the recognised ways of determining whether an IP2 engine was suffering pre-ignition when used very hard.Firstly, the engine starts to sound harsh, the temperature gauge rises rapidly - and then it doesn't stop when switched off....
- Sat Aug 01, 2009 2:17 pm
- Forum: technical interest and new ideas
- Topic: Timing and Balancing
- Replies: 16
- Views: 11638
Re: Timing and Balancing
[quote he said it made the best flames from the exhaust of any bike he had ever ridden ( I must try that some day ) cool[/quote] 30 - 40mph in 5th, operate the kill switch for a few seconds keeping the throttle open, filling the exhaust with unburned fuel, switch on again and ......BANG !R. ps, Paul...
- Sat Aug 01, 2009 9:46 am
- Forum: technical interest and new ideas
- Topic: Timing and Balancing
- Replies: 16
- Views: 11638
Re: Timing and Balancing
My personal opinion of course, but I think that if synthetic oils such as Comp 2 had been specified for the IP2 from the beginning, then many of the engine problems would have been avoided. Failures due to seal sticking may have been reduced, but there would still have been the whole list of other t...
- Fri Jul 31, 2009 8:44 am
- Forum: technical interest and new ideas
- Topic: Timing and Balancing
- Replies: 16
- Views: 11638
Re: Timing and Balancing
an option of using a spare rotor that may be a better fit on a shaft. Malc That's a whole new discussion !Shafts, and particularly air-cooled, tend to grow at the eccentrics during use and reduce the rotor bearing clearance below the accepted norm. The IP2 Manual, I think, used to recommend 30 - 35...
- Thu Jul 30, 2009 8:40 am
- Forum: technical interest and new ideas
- Topic: Timing and Balancing
- Replies: 16
- Views: 11638
Re: Timing and Balancing
I must admit that I've never done any practical tests myself to determine what is a maximum acceptable out-of-balance value before engine vibration becomes a problem to the rider (or to the main bearings).Aero engines used to be balanced to a wider tolerance as it was felt that vibration from the p...
- Wed Jul 29, 2009 11:22 pm
- Forum: technical interest and new ideas
- Topic: Rivnuts
- Replies: 4
- Views: 4215
Re: Rivnuts
Quick reply !Now 26 posts behind - will I ever catch up ?Nighty night.
- Wed Jul 29, 2009 11:20 pm
- Forum: General discussion (eveything else)
- Topic: The grey is going...
- Replies: 5
- Views: 5243
Re: The grey is going...
Make the back of the tank narrower, and the seat to match ! Have a look at '1010' (ex-Norton development bike) updated by Reuben F. and now owned by Frank W. A skilled bit of panel beating at a standard IP2 tank makes it narrower and much more comfortable to ride.R.Interpol2471 wrote: What to do next ?
- Wed Jul 29, 2009 11:13 pm
- Forum: technical interest and new ideas
- Topic: Rivnuts
- Replies: 4
- Views: 4215
Re: Rivnuts
Hi NightStalker,The originals fitted by Mitchenall were alloy. Steel ones may be stronger and less prone to stripping the thread in use, but take more load to set and can crack the grp.Originals were countersunk type by the way.R.
- Wed Jul 29, 2009 9:27 am
- Forum: technical interest and new ideas
- Topic: Timing and Balancing
- Replies: 16
- Views: 11638
Re: Timing and Balancing
Sorry Malc, second long answer Counter balance weights on Commanders have an extra piece of metal welded onto them. Why? 'Cos the balance weight wasn't big enough, with no allowance for production variations !The rotating assembly should be dynamically balanced to a maximum 40 gram.mm at each end t...
- Wed Jul 29, 2009 8:56 am
- Forum: technical interest and new ideas
- Topic: Timing and Balancing
- Replies: 16
- Views: 11638
Re: Timing and Balancing
You quoted retard as being about 50 degrees, was this the final figure settled on and is the "about" due to variations caused by temperature and voltage? Hi Malc,Both Sparkrite retard boxes and Boyer ignition units vary in their retard characteristics due to them being an assembly of disc...
- Tue Jul 28, 2009 7:37 pm
- Forum: calendar dates and announcements
- Topic: Nortons at Donington GP
- Replies: 4
- Views: 5762
Re: Nortons at Donington GP
Quite right ! I watched, with pride, as Ron Haslam finished 12th in the 1992 GP riding a JPS Norton - and on the same lap as the winner (whose name unfortunately escapes me).How things have changed.R.David Brown wrote: I remember Nortons doing well at Donington.DB
- Tue Jul 28, 2009 7:25 pm
- Forum: technical interest and new ideas
- Topic: F1 Sport - more running problems
- Replies: 30
- Views: 22089
Re: F1 Sport - more running problems
Hi Barney,I'm pleased you've solved your problems and now have a better understanding of your Sport. Next job will either be the fork oil seals or the clutch hub ! Something to look forward to, I suppose.I wonder if the problems with choke O-rings leaking in the last few years is the result of inco...
- Sun Jul 26, 2009 8:15 am
- Forum: technical interest and new ideas
- Topic: ROTELLA OIL
- Replies: 22
- Views: 20486
Re: ROTELLA OIL
I'm The old interplod behaved impecably apart from its two known faults; the choke cable which won't stay out, remedied by a twig that lives in the switch gear mirror stem tapping when it is not being used. I'm quite attached to that little twig now, The most 'engineering' solution I've seen, apart...
- Sat Jul 25, 2009 9:18 am
- Forum: General discussion (eveything else)
- Topic: Insert images in text ???
- Replies: 6
- Views: 5607
Re: Insert images in text ???
Thanks for the guidance, all !Like this (if it works for me) ?R.Took a while to find one of a suitable size !Now do I need some photo editing software to reduce the pixel size of most of my snaps to the maximum 800 x 800 ?
- Mon Jul 20, 2009 12:27 pm
- Forum: General discussion (eveything else)
- Topic: Insert images in text ???
- Replies: 6
- Views: 5607
Insert images in text ???
Can anyone tell me how to insert images into a text post. Rather than posting an image in My Gallery, I'd like to be able to illustrate a post to make it more clear (' .....worth a thousand words etc..')R.
- Mon Jul 20, 2009 12:23 pm
- Forum: technical interest and new ideas
- Topic: F1 Sport - more running problems
- Replies: 30
- Views: 22089
Re: F1 Sport - more running problems
Barney, "A picture's worth a thousand words"Look in my Gallery / Supreme Commanders.There's a close-up of the carb and idle adjuster on my Commander.Same carb & same adjuster on your Sport - but far less accessible for you.R.[img]C:\Documents%20and%20Settingsorton%20Mptors\My%20Documen...
- Mon Jul 20, 2009 12:05 pm
- Forum: technical interest and new ideas
- Topic: F1 Sport - more running problems
- Replies: 30
- Views: 22089
Re: F1 Sport - more running problems
Hi Barney,Secret, if it tell you, I'll have to shoot you !They're on the outer sides of the carburettor outlet castings and you need a long flat blade screwdriver to reach them.Take off the side panels and the trim panels ('hockey sticks') and you'll find a hole about 12mm diameter drilled through t...
- Sun Jul 19, 2009 8:22 pm
- Forum: technical interest and new ideas
- Topic: F1 Sport - more running problems
- Replies: 30
- Views: 22089
Re: F1 Sport - more running problems
Congratulations !All you need now to complete the job is to get the hot idle speed down to around 600rpm (which is almost off the bottom end of the tacho scale).After starting from cold, and with the choke returned to the normal riding position, it should fast-idle at around 12-1400rpm. As the water...
- Sun Jul 19, 2009 8:07 pm
- Forum: login and say hello!
- Topic: Hi to you all
- Replies: 11
- Views: 10476
Re: Hi to you all
In the words of the Polish alcoholic"Just because I'm Polish, you think I'm stupid, you think I know bu**er-nothing ! But I tell you now, I'm very clever - I know bu**er-all !"Clues ? jpsrobF1SportS2Seemples!R.jpsrob wrote:How did you know it was us?