Search found 42 matches

by Rotating588
Fri Sep 22, 2023 7:24 pm
Forum: Norton Rotary Enthusiasts Club
Topic: ?
Replies: 5
Views: 19143

?

Hello anyone out there?
by Rotating588
Sat Sep 24, 2022 4:49 pm
Forum: for sale and wanted
Topic: Interpol II spares
Replies: 2
Views: 8325

Re: Interpol II spares

I think I know the answer but do you have the classic rear light cluster? If you want to please contact me on r.392@btinternet.com.

Many thanks Roger
by Rotating588
Wed Jun 22, 2022 6:44 pm
Forum: Norton Rotary Enthusiasts Club
Topic: Classic Wiring Loom
Replies: 3
Views: 6742

Re: Classic Wiring Loom

Interpol2471 wrote: Wed Jun 22, 2022 2:15 am I think you can buy them new still from Wiring Products.
Hello Interpol 2471, do you mean Vehicle Wiring Products? I did a search but they said they don't do this. Regards Roger
by Rotating588
Sat Jun 18, 2022 11:35 am
Forum: Norton Rotary Enthusiasts Club
Topic: Classic Wiring Loom
Replies: 3
Views: 6742

Classic Wiring Loom

Hi, another long shot, where can I buy a Classic wiring loom for my IP2 look-a-like, well one day?
by Rotating588
Wed Jun 15, 2022 11:33 am
Forum: Norton Rotary Enthusiasts Club
Topic: Classic Light Cluster
Replies: 4
Views: 9964

Re: Classic Light Cluster

This is a message to Richard Negus, I don't know if you have been following this post about looking for a classic rear light cluster; Rob Goddard suggested I contact you as you were looking for this light for a customer's bike, and wonder if you have one we can copy or make up from bits and pieces a...
by Rotating588
Wed Apr 27, 2022 10:34 am
Forum: Norton Rotary Enthusiasts Club
Topic: Classic Light Cluster
Replies: 4
Views: 9964

Classic Light Cluster

Jannes has asked, in the classified section, if anyone has a spare Classic Rear Light cluster or is anyone prepared to remove their's so we can try to have a small batch made - 3D printing? At the moment it is just Jannes and me in need of the rear light. We would probably need a lager number to ord...
by Rotating588
Sun Apr 17, 2022 12:50 pm
Forum: for sale and wanted
Topic: Classic Rear Light Cluster
Replies: 2
Views: 8701

Re: Classic Rear Light Cluster

I didn't think of that but I WILL buy one if this takes off. Regards Roger
by Rotating588
Sun Apr 10, 2022 4:41 pm
Forum: for sale and wanted
Topic: Classic Rear Light Cluster
Replies: 2
Views: 8701

Classic Rear Light Cluster

I know the answer already but does any one have a Classic rear light cluster I can buy? Yes I know it is rarer than rocking horse poo but has one turned up since I last searched for one. I would consider a damaged item of one with parts missing. My email is r.392@btinternet.com or phone 01202 825903...
by Rotating588
Sun May 09, 2021 7:10 pm
Forum: Norton Rotary Enthusiasts Club
Topic: Bikinis
Replies: 7
Views: 12525

Re: Bikinis

Hi JB, still working, when I get time, on the electrics. I am not smiley at the moment as I connected my MX5 battery to the IP2 THE WRONG WAY ROUND. a very quick way to spend money!

Must look what I am doing in future!!!!!!!!!!!!!!!

Does anyone have an air box?

Roger
by Rotating588
Sun Apr 18, 2021 10:59 am
Forum: for sale and wanted
Topic: IP2 Parts for sale
Replies: 7
Views: 5330

Re: IP2 Parts for sale

Hello, I am looking for a good condition air box.
by Rotating588
Tue Apr 06, 2021 2:16 pm
Forum: for sale and wanted
Topic: Air box side cover RH Classic 92-1124
Replies: 3
Views: 3101

Re: Air box side cover RH Classic 92-1124

Hello Interpol2471, I might be interested in a good air box if you have one also the Classic rear light cluster.

Many thanks Roger
by Rotating588
Sat Feb 20, 2021 12:33 pm
Forum: technical interest and new ideas
Topic: Email Address
Replies: 3
Views: 3109

Re: Email Address

Hi Richard and thanks for your reply.

Yes randc ... is to be deleted, I have told the website but will check again soon.

Regards Roger
by Rotating588
Thu Feb 04, 2021 7:18 pm
Forum: technical interest and new ideas
Topic: Email Address
Replies: 3
Views: 3109

Email Address

Hello, this is a message to Richard Negus; Richard I recently sent you a personal message to which you might have replied BUT B.T. have shut down that email address; randc@btinternet.com because of low usage! Hopefully my email to you left the ROC so if you have replied would you please mind replyin...
by Rotating588
Thu Jan 14, 2021 11:59 am
Forum: technical interest and new ideas
Topic: Brake union thread & sizes
Replies: 3
Views: 2867

Re: Brake union thread & sizes

Air cooled.
by Rotating588
Tue Jan 12, 2021 4:39 pm
Forum: technical interest and new ideas
Topic: Brake union thread & sizes
Replies: 3
Views: 2867

Brake union thread & sizes

Hi me again, the demonstrator is "fighting back" but progress is being made.

Can anyone help with the thread type and sizes for each brake master cylinder, can't find it in the manual?

My new coils will not fit where Norton planned, any suggestions?

Many thanks Roger
by Rotating588
Sun Dec 27, 2020 2:06 pm
Forum: technical interest and new ideas
Topic: Ignition and Voltage Regulator units.
Replies: 7
Views: 5198

Re: Ignition and Voltage Regulator units.

Minimag did email saying coils and leads etc had to be changed. I will need to replace the coils anyway as one is way out on resistance and I would change the HT leads as a matter of course, the IP2 has not been taxed since 2011. I think the previous owner must have kept the engine lubricated as it ...
by Rotating588
Fri Dec 25, 2020 5:33 pm
Forum: technical interest and new ideas
Topic: Ignition and Voltage Regulator units.
Replies: 7
Views: 5198

Re: Ignition and Voltage Regulator units.

Thanks John, and I did contact Minimags who responded almost immediately with details. Julian also suggested I contact Richard Negus [who repaired the gearbox on my first IP2 and Molyed my end plates] as Richard also does an ignition also Andover N. So Richard will you please let me have details of ...
by Rotating588
Thu Dec 24, 2020 5:13 pm
Forum: technical interest and new ideas
Topic: Ignition and Voltage Regulator units.
Replies: 7
Views: 5198

Ignition and Voltage Regulator units.

Hi and can I bore you yet again for a word of advice. I have finally sorted out the "demonstrator's" wiring sorted out, after a couple of of enforced delays, but with 12V connected both the ignition unit and the regulator blow their fuses -0h and smokes a bit at first. I am now left with t...
by Rotating588
Sat Dec 19, 2020 12:49 pm
Forum: technical interest and new ideas
Topic: Which Battery?
Replies: 13
Views: 8116

Re: Which Battery?

Sorry I meant 210cca.
by Rotating588
Sat Dec 19, 2020 12:47 pm
Forum: technical interest and new ideas
Topic: Which Battery?
Replies: 13
Views: 8116

Re: Which Battery?

Sorry I meant 210cca.
by Rotating588
Sat Dec 19, 2020 12:46 pm
Forum: technical interest and new ideas
Topic: Which Battery?
Replies: 13
Views: 8116

Re: Which Battery?

Thanks for for your replies, so far it seems AGM is in front but Gordon what is 210ccs, is it something to do with energy density?

Thanks Roger
by Rotating588
Fri Dec 18, 2020 8:29 pm
Forum: technical interest and new ideas
Topic: Which Battery?
Replies: 13
Views: 8116

Re: Which Battery?

Hi Tony, thanks for your reply. What type of battery is it? Is lead acid or GEL or Lithium?

Roger
by Rotating588
Wed Dec 16, 2020 7:22 pm
Forum: technical interest and new ideas
Topic: Which Battery?
Replies: 13
Views: 8116

Which Battery?

I was brought up on lead acid batteries but might consider newer technology but do I go Lithium, AGM or GEL? What is the difference? Is there an advantage over lead/acid? On visiting various battery manufacturers' websites believe it or believe it not they all say their's is best! Unbiased advice is...
by Rotating588
Tue Dec 15, 2020 1:03 pm
Forum: Norton Rotary Enthusiasts Club
Topic: Alternative Silencers
Replies: 5
Views: 12103

Re: Alternative Silencers

Hello David and thanks for your idea. I am concerned about the noise level, I would prefer a deep growl rather than a noisy race noise. How would you describe yours? I have been looking at the stainless silencers in www.carbuilder.com they supply repackable silencers. Pipe size might be a problem. R...
by Rotating588
Tue Dec 01, 2020 5:51 pm
Forum: Norton Rotary Enthusiasts Club
Topic: Ignition Switch
Replies: 3
Views: 9186

Re: Ignition Switch

Thanks Avatar, great help. Roger
by Rotating588
Wed Nov 25, 2020 8:17 pm
Forum: login and say hello!
Topic: Pipework
Replies: 4
Views: 8207

Pipework

Hi all, I hope one of you can help with some small items from my IP2. When looking at the right hand side of the bike, in the carburetor tube right of the carburetor, the inlet pipe, are two metal pipes which look like they should have flexi tubes attached - one of which points to the left, but are ...
by Rotating588
Fri Oct 16, 2020 12:44 pm
Forum: Norton Rotary Enthusiasts Club
Topic: Ignition Switch
Replies: 3
Views: 9186

Ignition Switch

Can anyone help? I am struggling with the wiring on the IP2 Demonstrator. The bike came with 3 ignition switches but none with cables attached. One which I think is original the other two is anyone's guess but one of them is more like a car switch with the starting position. I will be buying a new c...
by Rotating588
Wed Sep 16, 2020 2:36 pm
Forum: Norton Rotary Enthusiasts Club
Topic: Alternative Silencers
Replies: 5
Views: 12103

Alternative Silencers

Hi has anyone fitted different [lighter] silencer to the IP2?

I would like to do so provided the noise is not too loud.

Thanks Roger
by Rotating588
Tue Sep 08, 2020 11:47 am
Forum: for sale and wanted
Topic: Which Plug
Replies: 3
Views: 3323

Which Plug

I have just been given 2 spark plugs for the IP2. These are NGK 7471, are they really for the rotary? Nothing like the plugs in my engine nor my previous IP2 [why did I sell her} nor in the manual.

Many thanks Roger
by Rotating588
Sat Aug 15, 2020 12:43 pm
Forum: for sale and wanted
Topic: IP2 or Classic Parts
Replies: 1
Views: 2733

IP2 or Classic Parts

Hi, I am after several parts for my IP2 which I am making into a Classic look a like, I hope.

I particularly need a lifting handle but other parts as well. If you can help please let me know here or on 01202 825903 or r.392@btinternet.com

Many thanks Roger